Energy management is all about knowing how much energy you’re consuming, where it’s coming from and where it’s going.
Almost all houses are connected to the electricity grid which provides the energy your home will need. The energy usage is being tracked by your energy meter and is billed to you by your energy provider. Energy prices can differ based on a schedule or change according to market price.
It has become popular for energy utilities to split the price of energy based on time of the day; this is done in order to incentivise consumers to shift their power needs towards times where the grid has lower loads. These periods of time are commonly referred to as Peak and Off Peak, exactly because they match periods of time where everyone is consuming energy (Peak) and periods of time where the energy is abundant but no one is using it (Off Peak). Therefore Peak energy is more expensive then Off Peak energy.
If you want to split energy usage into multiple tariffs, read this.
Home Assistant will need to know the amount of energy flowing through your meter. This data can be tracked in various ways.
The best way to get this data is directly from your electricity meter that sits between your house and the grid. In certain countries these meters contain standardized ways of reading out the information locally.
The P1 port is a standardized port in the Netherlands, Belgium and Luxembourg. A P1 reader can connect to this port and receive real-time information.
We have worked with creator Marcel Zuidwijk to develop SlimmeLezer+. It’s an affordable P1 reader powered by ESPHome that will seamlessly integrate this information in Home Assistant. It is being sold on his website and the firmware is open source on GitHub.
The Zigbee Energy Profile is a wireless energy standard to provide real-time information about electricity usage. This standard is available in some meters in the US, UK and Australia. This is not “normal” Zigbee as implemented by Home Assistant but requires special certified hardware.
One such option with a local API is the Rainforest EAGLE-200.
Many meters, including older ones, have an LED that will flash whenever energy passes through it. For example, each flash is a 1/1000th kWh. By monitoring the time between flashes it’s possible to determine the energy consumption.
We have developed Home Assistant Glow, an open source solution powered by ESPHome’s pulse meter sensor. You put it on top of the activity LED of your electricity meter and it will bring your consumption into Home Assistant.
CT clamp sensors measure your energy usage by looking at the current passing through an electrical wire. This makes it possible to calculate the energy usage. In Home Assistant we have support for off-the-shelf CT clamp sensors and you can build your own.
The off-the-shelf solution that we advise is the Shelly EM. The device has a local API, updates are pushed to Home Assistant and it has a high quality integration.
Attention! Installing CT clamp sensor devices requires opening your electrical cabinet. This work should be done by someone familiar with electrical wiring. Your qualified installer will know how to do this.
Some energy providers will provide you real-time information about your usage and have this data integrated into Home Assistant.
If you are unable to select your energy sensor in the grid consumption drop-down, make sure that its value is being recorded in the Recorder settings.
Disclaimer: Some links on this page are affiliate links helping support the Home Assistant project.